C60 Carbon Steel Sheet
C60 Carbon Steel Sheet
C60 Carbon Steel Sheet
C60 Carbon Steel Sheet
C60 Carbon Steel Sheet

C60 Carbon Steel Sheet

Mechanical properties: Tensile strength σb (MPa) : ≥675(69) Yield strength σs (MPa) : ≥400(41) Elongation δ5 (%) : ≥12 Section shrinkage ratio ψ (%) : ≥35 Hardness: no heat treatment ≤255HB; Annealed steel ≤229HB Sample size: 25mm

Send Inquiry

Product Introduction

C60 steel is made up of various alloying elements, including carbon, manganese, silicon, phosphorus, and sulfur. It has a carbon content of between 0.57-0.65%, which gives it its high strength and hardness. The alloying elements improve its properties, making it tougher and more durable than plain carbon steel.

C60 carbon steel sheet is produced through a hot-rolling process, where the steel is heated to a high temperature and then rolled into a sheet. It is available in a variety of sizes and thicknesses, making it easy to find the right product for your application.

C60 carbon steel sheet is often used in the manufacturing of high-strength gears, shafts, bearings, and springs. Its high hardness and wear resistance also make it suitable for cutting and grinding tools, as well as for making molds and dies.

The following are some product specifications of C60 carbon steel plate:

Thickness range: 0.1mm-300mm
Width range: 100mm-3000mm
Length range: 1000mm-12000mm
Surface treatment: black, spray paint, paint, sandblasting, etc
Special requirements: Can be customized according to customer needs

Chemical composition % of steel C60 (1.0601): EN 10277-2-2008

Cr + Mo + Ni = max 0.63

C	Si	Mn	Ni	P	S	Cr	Mo
0.57 - 0.65	max 0.4	0.6 - 0.9	max 0.4	max 0.045	max 0.045	max 0.4	max 0.1

Mechanical properties of steel C60 (1.0601)

Nominal thickness (mm):	to 16	16 - 100	100 - 250	250 - 500	500 - 1000
Rm - Tensile strength (MPa) (+N)	710	670	650	630	620

Nominal thickness (mm):	5 - 10	10 - 16	16 - 40
Rm - Tensile strength (MPa) (+C)	800-1150	780-1130	730-1100

Nominal thickness(mm):	to 16	16 - 100	100 - 250	250 - 500	500 - 1000
Re - Upper yield strength or R_p0.2 - 0.2% proof strength (MPa) (+N)	380	340	310	275	260

Nominal thickness(mm):	5 - 10	10 - 16	16 - 40
R_p0.2 0.2% proof strength (MPa) (+C)	630	550	480

Nominal thickness (mm):	5 - 10	10 - 16	16 - 40
A - Min. elongation at fracture (%) (+C)	5	5	6

Nominal thickness (mm):	to 16	16 - 100	100 - 250
A - Min. elongation Lo = 5,65 √ So (%) (+N)	10	11	11

Brinell hardness (HBW): (+S)	255
Brinell hardness (HBW): (+A)	241
Brinell hardness (HBW): (+SH)	198 - 278

Inspection:

1.0601 C60 60 Structural steel

Carbon Steel Bar C60

C60 High Carbon Steel Strips

Product Application

High Carbon Steel 1.0601 C60

Hot Tags: c60 carbon steel sheet, China c60 carbon steel sheet manufacturers, suppliers, factory, Cold Rolled High Carbon Steel Coil, Carbon Steel Round Bar C60, 65Mn High Carbon Steel Sheet, Cold Drawn Steel Bar, S20C Carbon Steel, Calibrate Steel Rod

C60 Alloy Steel Plate

Sheet C60 Steel Plate