Introduce the method of steel plate rust treatment

The traditional method of rusting on the steel plate generally uses rusting water to urge rust, but the rusting water also has limitations. After finishing the rust effect on the steel plate with anti-corrosion paint, we use a new type of rust paint material to make rust on the steel plate instead of relying on the corrosion of rusty water.
Do a good job of anti-rust treatment on the surface, clean the surface and keep it dry. On the contrary, if there is no anti-corrosion paint on the surface, if you want to make rust paint, it is recommended to do a good job of anti-rust treatment first. There are 4 bottles of rust paint, each It is 1 kg/bottle for 1 vermicelli, 1.5 kg/bottle for super glue, 1 kg/bottle for metal catalyst, and 1 kg/bottle for protective film. The first coat of rust finish paint is enough to cover the base plate. If it is not covered, then after it dries, another coat of rust finish paint is sufficient until it is covered. The next important step is to start applying the metal catalyst, which is blue in color. It is very important to apply this rust-promoting paint. The concept of time must be mastered in time, which is a bit difficult for beginners , but it will be mastered after a few more tries. After the metal catalyst is activated, generally wait for more than 4 hours, and the rust will gradually come out. At the beginning of sizing the protective film, after the rust paint is completely formed and dried, you can start sizing the protective film. The protective film is a milky white liquid, and it will not change the color of rust after painting.