Stainless steel is now inseparable from our lives, from industrial production to POTS and pans. Here I will introduce to you the processing points of a color stainless steel. 1. If you want to cut and bend the colored stainless steel plate, such as kicking
Stainless steel is now inseparable from our lives, from industrial production to POTS and pans. Here I will introduce to you the processing points of a color stainless steel.
1. If you want to cut and bend the colored stainless steel plate and other processing, such as the molding of the skirting line, door frame wrapping, etc., then the purchase of colored stainless steel plate, please be sure to communicate with the manufacturer, must be required to stick more than 6C protective film, in order to avoid cutting, throwing, bending process scratches on the plate surface.
2 Color stainless steel welding, welding around the area will fade, should try to avoid welding, can be fixed with screws, as far as possible to choose screws, must be welded, should be as far as possible in the back, dark and other places can not be seen welding, welding method should be used spot welding. If it must be welded in the front or conspicuous place, the solder joint should be small, do not polish after welding, and the color close to the oil painting rod should be covered with foam after welding. If the workpiece is relatively small, and the requirements of Party A are good, you can use natural stainless steel welding and polishing, and then coloring.
3 After the construction should be torn off as soon as possible to avoid degumming, if there is a slight degumming phenomenon, alcohol or acetone can be used to wipe off, if degumming is more serious, you can also use water.
