50CrV4 Grade in Annealed Form
The 50CrV4 grade is a highly sought after steel alloy that is widely used in the manufacturing industry for a variety of applications. This grade of steel is known for its outstanding strength, durability, and flexibility, making it an ideal material for a range of processes.
When this steel alloy is in its annealed form, it is even more versatile and easy to work with. Annealing involves heating the steel to a particular temperature and then allowing it to cool slowly. This process helps to soften the steel and reduce its hardness, making it easier to shape and manipulate.
The advantages of using 50CrV4 grade steel in its annealed form are numerous. For one, it can be easily formed into a wide range of shapes, making it ideal for precision work and other intricate processes. Additionally, the steel is less likely to crack or break during the manufacturing process, which can save time and costs.
Another benefit of using 50CrV4 grade steel in its annealed form is that it allows for greater customization. Manufacturers can easily adjust the properties of the steel by altering the annealing process, giving them greater flexibility in terms of the materials they work with.
Despite all of the benefits of using 50CrV4 grade steel in its annealed form, it is important to note that safety protocols must still be followed when working with this material. However, with the right training and equipment, manufacturers can create high-quality products using this highly versatile and reliable steel alloy.
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Thick (mm) | Yield stress (Mpa) | Tensile stress (Mpa) | Elongation (%) |
|---|---|---|---|---|---|---|---|---|---|
| 0.47-0.55 | 0.15-0.40 | 0.7-1.1 | ≦0.035 | ≦0.035 | 0.9-1.2 | 10 | ≧1180 | 1370-1670 | ≧6 |
Machining performance
Download 50CrV4 the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
Hot Tags: 50crv4 grade in annealed form, China 50crv4 grade in annealed form manufacturers, suppliers, factory, 50CrV4 Spring Alloy Steel Strip, 65Mn Carbon Steel Band Saw Blade, High Carbon Steel Saw Blade, Saw Blade Steel, Chain Saw Steel, S50c Carbon Steel
Previous
50CrV4 Sheet / PlateYou Might Also Like
Send Inquiry