Get A Quote Now SS 304 Pipe
Get A Quote Now SS 304 Pipe
Get A Quote Now SS 304 Pipe

Get A Quote Now SS 304 Pipe

The most important elements in 304 are Ni and Cr, but they are not limited to these two elements. Specific requirements are specified by product standards. The common judgment situation in the industry believes that as long as the Ni content is greater than 8% and the Cr content is greater than 18%, it can be considered 304 stainless steel.

Send Inquiry

Product Introduction

Get A Quote Now SS 304 pipe

304 is a kind of stainless steel material. Steel number: 0Cr18Ni9;
304 stainless steel is a kind of universal stainless steel material, rust resistance than 200 series of stainless steel material is stronger.
304 stainless steel has excellent corrosion resistance and good resistance to intergranular corrosion.
For oxidizing acids, it is concluded in the experiment that 304 stainless steel has strong corrosion resistance in nitric acid below the boiling temperature of ≤65%.
It also has good corrosion resistance to alkaline solutions and most organic and inorganic acids.
Density: 7.93 g/cm ³, chemical composition as follows:
0.03 0.08% C (carbon), Si (silicon) 1% or less, Mn (Mn) of 2% or less, P (P) of 0.05% or less, S (sulphur) 0.03% or less, Cr (Cr) : 18. 20%, Ni (Ni), 8-11%
Physical properties: tensile strength σb (MPa)≥520, conditional yield strength σ0.2 (MPa)≥205, elongation δ5 (%)≥40, section shrinkage ψ (%)≥60, hardness: ≤187HB; ≤90HRB; ≤200HV

Product Name	stainless steel pipe
Material	steel /Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
Shape	Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc
	Alloy : Alloy 20/28/31;
	Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;
	Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665
	Haynes: Haynes 230/556/188;
	Inconel Series:
	Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20;
	Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
	Incoloy: Incoloy 800/800H/800HT/825/925/926;
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
	Monel: Monel 400/K500/R405
	Nitronic: Nitronic 40/50/60;
	Nimonic: Nimonic 75/80A/90/A263 ;
Specification	Wire: 0.01-10mm Strip: 0.055.0-5.0250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product Characteristics	1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Standard	GB,AISI,ASTM,DIN,EN,SUS,UNS etc
Inspection	ISO,SGS,BV and so on.
Application	High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging	1. cases packed in wooden cases 2. paper packaging 3. plastic packing 4. foam packaging Packaging according to customer requirements or products
Delivery	7-25days or according to the product
Payment	L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirements payments for offline orders.