SSP304 Alloy 304 Stainless Pipe 2.5in SCH40

SSP304 Alloy 304 Stainless Pipe 2.5in SCH40
SSP304 Alloy 304 Stainless Pipe 2.5in SCH40
SSP304 Alloy 304 Stainless Pipe 2.5in SCH40
SSP304 Alloy 304 Stainless Pipe 2.5in SCH40

SSP304 Alloy 304 Stainless Pipe 2.5in SCH40

HSN code for Stainless Steel Pipe 304 is 7304.

Send Inquiry

Product Introduction

304 stainless steel pipe precautions:

1, the stainless steel pipe should be placed horizontally, and the diameter direction is parallel with the cutter, that is, the tool should be vertical with the pipe, to ensure that the caliber of the stainless steel pipe is smooth.

2, to leave a margin, especially mechanical cutting, knife edge has a certain width, only leave enough margin, in order to make the length of the pipe enough, you can adjust the stainless steel pipe mouth.

3, in the mechanical cutting should be constantly manual lubrication, clear the metal debris of the knife edge, so as not to affect the cutting effect.

4, in the cleaning and care of stainless steel pipe do not use acid and alkali substances for cleaning.

Product name	Stainless Steel Pipe
Surface	Polishing,annealing,pickling,bright
Standard	GB, AISI, ASTM, ASME, EN, BS, DIN, JIS
Technique	Cold Rolled, Hot Rolled
Grade	304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201, 202
Thickness	0.4mm-30mm or customized
Out diameter	6mm-630mm or customized
Length	2000mm, 3000mm,4000mm, 5800mm, 6000mm,12000mm or as required
Processing Type	Cutting, bending,welding
Application	Widely used in petroleum,foodstuff,chemical industry,construction, electric power,nuclear,energy,machinery,biotechnology,paper making,shipbuilding,boiler fields. Pipes also can be made according to the customer's required.
Lead Time	7-15 working days after the receipt of 30% deposit
Payment Terms	30% TT in advance, 70% TT /70% LC at sight balance before shipment
Price Terms	FOB, EXW, CIF, CFR
Packing	Each tube in a plastic bag with size label outside and pack in small bundles or according to customer request

Chemical Composition

Grade of Material	C	Si	Mn	P	S	Ni	Cr	Mo
AISI 201/ASTM201/UNS S20100/DIN 1.4372/JIS SUS201	≤0.15	≤1.00	5.50~7.50	≤0.060	≤0.03	1.00 ~1.50	13.50~15.00	\
AISI 202/ASTM 202/UNS S20200/DIN 1.4373/JIS SUS202	≤0.15	≤1.00	7.50~10.00	≤0.060	≤0.03	4.00~6.00	17.00~19.00	\
AISI 304/ASTM 301/UNS S30400/DIN 1.4301/JIS SUS304	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	8.00~11.00	18.00~20.00	\
AISI 304L/ASTM 304L/UNS S30403 DIN1.4306/JIS SUS304L	≤0.035	≤1.00	≤2.00	≤0.045	≤0.03	8.00~13.00	18.00~20.00	\
AISI 316/ASTM 316/UNS S31600/DIN 1.4401/JIS SUS316	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	10.00~14.00	16.00~18.00	2.00~3.00
AISI 316L/ASTM 316L/UNS 31603/DIN 1.4404/JIS SUS316L	≤0.035	≤1.00	≤2.00	≤0.045	≤0.03	10.00~14.00	16.00~18.00	2.00~3.00
AISI 316L Ti/ASTM 316L/UNS S31635/DIN 1.4571/JIS SUS 316Ti	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	10.00~14.00	16.00~18.00	2.00~3.00
AISI 409L/ASTM 409L	≤0.03	≤1.00	≤1.00	≤0.040	≤0.03	\	10.50~11.75	\
AISI 904L/ASTM 904L	≤0.02	≤1.00	≤2.00	≤0.045	≤0.035	23.0-28.0	19.0-23.0	4.0-5.0
Grade of Material	Elongation (%)		Tensile Strengh (Rm) N/m m³		Yield Strength (Rp) 0.2%N/m m³		Hardness (HV)
AISI 201/ASTM201/UNS S20100/DIN 1.4372/JIS SUS201	≥35		≥520		≥210		≤253
AISI 202/ASTM 202/UNS S20200/DIN 1.4373/JIS SUS202	≥35		≥590		≥210		≤218
AISI 304/ASTM 301/UNS S30400/DIN 1.4301/JIS SUS304	≥35		≥520		≥210		≤200
AISI 304L/ASTM 304L/UNS S30403 DIN1.4306/JIS SUS304L	≥35		≥480		≥180		≤200
AISI 316/ASTM 316/UNS S31600/DIN 1.4401/JIS SUS316	≥35		≥520		≥210		≤200
AISI 316L/ASTM 316L/UNS 31603/DIN 1.4404/JIS SUS316L	≥35		≥480		≥180		≤200
AISI 316L Ti/ASTM 316L/UNSS31635/DIN 1.4571/JIS SUS 316Ti	≥40		≥520		≥205		≤200
AISI 409L/ASTM 409L	≥25		≥360		≥175		≤175
AISI 904L/ASTM 904L	≥35		≥490		≥216		\