Stainless Steel 316L Pipes And Tubes
Stainless Steel 316L Pipes And Tubes
Stainless Steel 316L Pipes And Tubes
Stainless Steel 316L Pipes And Tubes

Stainless Steel 316L Pipes And Tubes

Can ER316L stainless steel pipe be welded with A132 electrode?

Send Inquiry

Product Introduction

Can ER316L stainless steel pipe be welded with A132 electrode?

It is the material of the electrode wire, which should be close to or slightly higher than the base material, and the weldability is better. The basic principles for selecting welding rods are as follows:

1) The principle of equal strength is to select the electrode with the same strength grade as the base metal. Generally used for welding low carbon steel and low alloy steel.

2) The principle of the same composition means that the electrode with the same or similar chemical composition as the base metal is selected. Generally used for welding heat-resistant steel, stainless steel and other metal materials.

3) Crack resistance principle The selection of good crack resistance alkaline electrode, so as to avoid cracks in the joint during welding and use. It is generally used for welding structures with large stiffness, complex shape and dynamic load during use.

4) The principle of anti-porosity is limited by the welding process conditions, such as the oil, rust and other inconvenience to clean the joint parts of the welding parts, should be selected with strong anti-porosity ability of acid electrode, so as to avoid gas retention in the weld during the welding process, forming porosity.

5) The principle of low cost under the premise of meeting the requirements of use, try to choose the electrode with good process performance, low cost and high efficiency. The selection of welding electrode must be in the premise of ensuring the safety of the welding structure, feasible use, according to the chemical composition of the welding material, mechanical properties, plate thickness and joint form, welding structure characteristics, stress state, structural conditions on the requirements of weld performance, welding construction conditions and technical and economic benefits, targeted selection of welding electrode, if necessary, also need to carry out weldability test.

Prices of 316L Stainless Steel Welded Pipes

Price list of Stainless Steel 316L Pipe	UNS S316L03 Pipe Price in INR	UNS S316L03 Pipe Price in USD	UNS S316L03 Pipe Price in UAE Dirham
ASTM A312 TP 316L Pipe 3.0mm Dia X 0.50mm Wall X500mm	INR 18582.91	200.00 USD	959.10 UAE Dirham

Composition Standard of ASTM A312 TP 316L Pipe

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 316L	0.035 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 - 18.00	2.00 - 3.00	10.00 - 14.00	68.89 min

Mechanical Strength of ASME SA312 TP 316L Pipes

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1399 °C (2550 °F)	Psi - 75000 , MPa - 515	Psi - 30000 , MPa - 205	35 %

316L SS Seamless Pipe Equivalent Material

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316L	1.4404 / 1.4435	S31603	SUS 316L	316S11 / 316S13	03Ch17N14M3 / 03Ch17N14M2	Z3CND17-11-02 / Z3CND18-14-03	X2CrNiMo17-12-2 / X2CrNiMo18-14-3