150HB Wear Resistant Plates NM450 Steel Plate

150HB Wear Resistant Plates NM450 Steel Plate

In order to better prevent the occurrence of shrinkage, shrinkage, porosity and cracks in the cast parts of the wear plate, the wear plate should have a balanced thickness, prevent the occurrence of bevel and bevel structure, add wood chips to the mold sand, and add coke to the core. Hollow sand core and mineral sand core are used to improve the concession and permeability of sand mold or sand core. It is understood that the wear-resistant plate is a brighter product type in the wear-resistant plate. The hardness of the wear plate is large, and the application range is wide, and it can be implemented in almost all construction machinery industries.

Wear-resistant steel plate in the whole process of application sometimes will also be involved in deformation, in general, deformation is not easy to occur, because it has stronger wear resistance and other practical effects, but if the way is wrong in the whole process of application is likely to harm the ductility, will cause the probability of deformation, so in the use of the link proposed understanding of the manufacturer should not be hasty application. To eliminate welding shortcomings, mechanical processing can be used to manufacture or angular sand wheel grinding and polishing, but it should be noted that the weld should be suitable, and the scope of heating during welding repair, layer temperature and post-heat should be moderate, and the temperature should be consistent with the temperature of welding.