S20C Low-carbon Steel
S20C Low-carbon Steel
S20C Low-carbon Steel
S20C Low-carbon Steel

S20C Low-carbon Steel

The product specifications of S Cold Drawn Carbon Steel S20C are as follows: 1. Material: Carbon steel S20C 2. Steel number: JIS G4051 S20C/DIN EN 10084 C20E/AISI 1020 3.Diameter range: 5.5-250mm 4. Surface status: bright, black, blunt 5. Production process: cold drawing 6. Chemical composition, carbon (C) 0.18% 0.23%, silicon (Si), manganese (Mn) 0.3% - 0.15% - 0.35% 0.6%, phosphorus (P) of 0.030% or less, sulfur (S) of 0.035% or less 7. Tensile strength: about 520 MPa 8. Yield strength: about 245 MPa 9. Elongation rate: about 25% 10. Hardness: ≤197 HB 11. Density: 7.85g/cm³

Send Inquiry

Product Introduction

S20C is a low-carbon steel grade that contains a nominal amount of 0.20% carbon. The low carbon content of the steel ensures that it is more ductile, or easily formed and manipulated without being brittle. S20C is often used in applications where toughness and malleability are critical, such as in the manufacturing of automotive parts, machinery components, and general engineering applications. The steel is typically forged or rolled into shaped products like bars, rods, and seamless tubes. S20C has moderate strength and good machinability, making it a popular choice for a wide variety of applications where a stronger, harder steel is not necessary.

The following are the product specifications of S20C mild steel:

1. Chemical composition: Chemical composition mainly includes carbon, silicon, manganese, phosphorus, sulfur and other elements.

2. Physical properties: Physical properties include elastic modulus, yield strength, elongation, fracture toughness and other indicators.

3. Processing performance: It has good cold processing performance and can carry out various cold processing operations, such as cold rolling, cold drawing, etc.

4. Mechanical properties: high strength and toughness, can withstand large tensile force and impact.

Chemical Composition&Related Specifications

Grade	C	Si	Mn	P	S
1020	0.17-0.23	≤ 0.4	0.30-0.60	≤ 0.04	≤ 0.05

Carbon steel is mainly used to be manufactured moving parts with high strength, such as the impeller of turbomachine, piston of compressor, shaft, gear, rack, worm, Carbon steel rod applies to chemical industry, shipping industry, manufacturing industry,construction, decorate Industry,electric power, pump shafts, sanitary wares,furniture handles, boiler,high temperature resistant,low temperature resistant, corrosion resistant.

JIS G4051 S20C Carbon Steel

Manufacture all kinds of stamping parts, construction and engineering structure and some of the less important machine structure
and parts. Buildings and Bridges, Vehicles, towers and other structures. Used as a floor, workshop escalator, working pedal, ship deck and car plate and so on Make fixed boiler, boiler and other important hull attachments. Pressure vessels, welding gas cylinder steel plate Production of cutting tools, measuring tool and die

S20C Cold Drawn Carbon Steel Stainless Steel Round Bar