How to scrub and maintain brushed stainless steel correctly?
Before this, the vast majority of people do not know how to clean and maintain stainless steel, more just hold dishwashing detergent and rags for simple scrubbing, but what you do not know is that when you do this, it is likely to have destroyed the protective layer of the stainless steel surface, not only did not play a role in maintenance, but also reduced its service life. So whether it is brushed stainless steel or mirror stainless steel, how should any type of stainless steel be properly maintained and maintained? The method I will tell you again, as follows:
Generally, what we see most is that the surface of colored stainless steel has a layer of dirt, and most of this layer of dirt is the accumulation of soot, dust, and stains after a long time, so we have to prepare a special stainless steel surface cleaning agent, and a relatively fine cloth.
1. Regular maintenance of cleaning agent
Stainless steel decorative plate in the air slightly humid environment after a period of time, the surface will be attached to a large number of dust impurities, easy to produce electrochemical reaction, which will accelerate the corrosion of the material, Xiaobao recommends that you use a special cleaning agent to clean the surface, and then dry with a dry rag, maintenance cycle for one month, the most important thing is to keep the surface of the plate dry and cool.
2. Wax
If you want to extend the maintenance cycle, this is not difficult, when we have completed the regular maintenance of the cleaning agent, you can choose to wax the stainless steel surface, waxing treatment is equivalent to adding a simple anti-rust layer on the stainless steel surface, but the effect can only be maintained for about three months, and the cost is not expensive, a dozen or twenty pieces.
3, surface treatment process
Although stainless steel has a certain corrosion resistance, but will eventually rust, the surface treatment process is equivalent to the original performance on the basis of adding an anti-rust layer, the effect and waxing is somewhat similar, but this anti-rust layer has always existed, here the process is electroplating process.
There is another situation is that the stainless steel that has been put into use has not been maintained for a period of time, and there has been a slight rust phenomenon, at this time how to do? Here's how:
1, special rust remover removal
There are many stainless steel special or metal material general rust remover on the market, the price is not expensive, dozens of dollars a bottle, you can use more than half a year, through the chemical elements in the rust remover and rust chemical reaction, so as to remove rust, this is the most direct and straightforward method.
2, white vinegar rust removal method
This method and the above method have the same wonderful, it is worth noting that this method is suitable for daily use of high frequency of stainless steel products (stainless steel pot, stainless steel pot, stainless steel utensils, etc.), first into the white vinegar, press 1: 1 proportion into the water, heating to boil, so that the rust will be broken down by the white vinegar diluent, and then wipe with a clean ball, the surface of the stainless steel will be immediately bright as new.
