Stainless steel pipe installation technology detailed analysis?
1, according to the trench soil quality, groundwater, slot section, load conditions and other factors to design, it is required to be firm and reliable, to prevent collapse, support shall not hinder the pipe and stable pipe.
2, T interface pipe in the vertical or horizontal direction of the bend should be set up piers. The pier size should be calculated according to pipe diameter, rotation Angle, working pressure and other factors.
3, after the pipeline installation is completed and the pressure test is qualified, it is best to wash with low chlorine ionized water and 0.03% potassium permanganate disinfection.
4, stainless steel external anti-corrosion coating should be based on the quality of the soil to choose galvanized and epoxy asphalt coating or higher requirements of the coating.
5, as long as the socket is connected to the stainless steel wire, it must be calculated to set the pier.
6. When transporting drinking water, the pipeline should not pass through the toxic pollution area, and protective measures should be taken if necessary.
The above is the 316l stainless steel pipe installation technology introduced in detail by Xiaobian. I hope these can be of some help to you.
