2.5" Sch 40 T316 316L Stainless Welded Pipe

2.5" Sch 40 T316 316L Stainless Welded Pipe
2.5" Sch 40 T316 316L Stainless Welded Pipe
2.5" Sch 40 T316 316L Stainless Welded Pipe
2.5" Sch 40 T316 316L Stainless Welded Pipe

2.5" Sch 40 T316 316L Stainless Welded Pipe

Stainless steel pipe fittings TP316L What is the meaning?
TP stands for American standard

Send Inquiry

Product Introduction

2.5" sch 40 T316 316L Stainless Welded Pipe

316 Grade 0Cr17Ni12Mo2 (old) 06C17N12M2(new)
It is equivalent to the American standard TP316 and the Japanese standard SUS316, which is simply 316 material

316L Brand 00Cr17Ni14Mo2(old brand) 022C17N12M2(new brand)
It is equivalent to the American standard TP316L and the Japanese standard SUS316L, which is simply 316L material

product details

Dachang raw materials: strict selection of materials, high surface finish, good corrosion resistance and long service life.
Notch leveling: good processing equipment, good processing technology, product notch leveling without burrs, good mechanical properties.
Not easy to deform: the product has high plasticity and toughness, and is not easy to deform and break under strong pressure.
Processing and cutting: conventional stock is sufficient, rich specifications and materials, can be customized according to demand, to provide all kinds of stainless steel processing services.

Stainless Steel 316L Pipes Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316	1.4401 / 1.4436	S31600	SUS 316	316S31 / 316S33	–	Z7CND17‐11‐02	X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L	1.4404 / 1.4435	S31603	SUS 316L	316S11 / 316S13	03Ch17N14M3 / 03Ch17N14M2	Z3CND17‐11‐02 / Z3CND18‐14‐03	X2CrNiMo17-12-2 / X2CrNiMo18-14-3

ASME SA 312 Stainless Steel 316L Pipes Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
SS 316	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	11.00 – 14.00	67.845 min
SS 316L	0.035 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	10.00 – 14.00	68.89 min

ASTM A312 Stainless Steel 316L Pipes Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %