Seamless Pipe ASTM 316 316L
The national standard 316 and the American standard 316L are 7.98kg /d㎥
Seamless Pipe ASTM 316 316L
The difference between 316L and 316 stainless steel pipe:
316L is an ultra-low carbon stainless steel (austenitic stainless steel with less than 0.03% carbon content and very low intergranular corrosion sensitivity).
316 stainless steel is low-carbon stainless steel, not ultra-low carbon stainless steel.
Different yield strength: 316 210(N/MM2); 316L 180(N/MM2).
Different tensile strength: 316 520(N/MM2); 316L 480(N/MM2).
316/316L/316TI STAINLESS STEEL PIPES AND TUBES EQUIVALENT GRADES
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| SS 316 | S31600 | 1.4401 / 1.4436 | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | SUS 316 | 316S31 / 316S33 | - |
| SS 316L | S31603 | 1.4404 / 1.4435 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 |
| SS 316Ti | S31635 | 1.4571 | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 | SUS 316Ti | 320S31 | 08Ch17N13M2T |
CHEMICAL COMPOSITION OF STAINLESS STEEL 316/316L/316TI SEAMLESS PIPES AND TUBES
| Element | C | Mn | Si | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| 316 (S31600) |
0.08 max |
2.0 max |
0.75 max |
0.045 max |
0.03 max |
min: 16.0 max: 18.0 |
min: 2.0 max: 3.0 |
min: 10.0 max: 14.0 |
0.10 max |
| 316L (S31603) |
0.03 max |
2.0 max |
0.75 max |
0.045 max |
0.03 max |
min: 16.0 max: 18.0 |
min: 2.0 max: 3.0 |
min: 10.0 max: 14.0 |
0.10 max |
| 316TI(S31635) | - | - | - | - | - | 16.0 | 2.00 | 10.0 | - |
| 0.08 | 2 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.1 |
MECHANICAL PROPERTIES OF STAINLESS STEEL 316/316L/316TI SEAMLESS PIPES AND TUBES
| Grade | Tensile Strength ksi (min) |
Yield Strength 0.2% ksi (min) |
Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
|---|---|---|---|---|---|
| 316 | 75 | 30 | 40 | 217 | 95 |
| 316L | 70 | 25 | 40 | 217 | 95 |
| 316TI | 515(Mpa) | 205(Mpa) | 35 | 205 | 75 |
PHYSICAL PROPERTIES OF 316/316L/316TI STAINLESS STEEL PIPES AND TUBES
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/°F x 10-6 |
Specific Heat (BTU/lb/°F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| 0.29 at 68°F | 100.8 at 68 212°F | 29.1 at 68°F | 29 | 8.9 at 32 – 212°F | 0.108 at 68°F | 2500 to 2550 |
| 9.7 at 32 – 1000°F | 0.116 at 200°F | |||||
| 11.1 at 32 – 1500°F |
DETAILS SHOW
Application
Packing & Delivery
SURFACE
Product Testing
Hot Tags: seamless pipe astm 316 316l, China seamless pipe astm 316 316l manufacturers, suppliers, factory, Carbon Steel Round Bar C60, 50CrV4 Spring Alloy Steel Strip, D6A High Carbon Steel Strip, Gang Saw Blades Steel, Stainless Steel Pipe, NM450 Wear Resistant Sheet
You Might Also Like
Send Inquiry