Seamless Stainless Steel Tube
Seamless Stainless Steel Tube
Seamless Stainless Steel Tube
Seamless Stainless Steel Tube

Seamless Stainless Steel Tube

American standard Tb316L 00Cr17Ni12Mo2 National standard 316L 00Cr17Ni14Mo2 steel content is different.

Send Inquiry

Product Introduction

Product name: 316L stainless steel seamless pipe
Steel pipe or a variety of conventional weapons indispensable is an economic cross-section of steel, widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, automobile drive shaft, bicycle frame and construction of steel scaffolding. The manufacture of ring parts with steel pipes can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing hours, such as rolling bearing rings, jack sleeves, etc., less materials, pipes, barrels, etc., are made of steel pipes. Steel pipes can be divided into round pipes and special-shaped pipes according to the different shapes of the cross-sectional area. Since the circle area is the largest when the circumference is equal, more fluid can be transported with a circular tube. In addition, when the annular section is subjected to internal or external radial pressure, the force is more uniform, so the vast majority of steel pipes are round pipes.

ASME SA 312 Stainless Steel 316L Pipes Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
SS 316	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	11.00 – 14.00	67.845 min
SS 316L	0.035 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	10.00 – 14.00	68.89 min

ASTM A312 Stainless Steel 316L Pipes Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

Stainless Steel 316L Pipes Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316	1.4401 / 1.4436	S31600	SUS 316	316S31 / 316S33	–	Z7CND17‐11‐02	X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L	1.4404 / 1.4435	S31603	SUS 316L	316S11 / 316S13	03Ch17N14M3 / 03Ch17N14M2	Z3CND17‐11‐02 / Z3CND18‐14‐03	X2CrNiMo17-12-2 / X2CrNiMo18-14-3