2B Stainless Steel Plate

 

2B stainless steel plate not only has a high surface finish, but also the corrosion resistance and wear resistance of this material are also very suitable for use in the kitchen environment, and it is easy to clean and disinfect, which is of great significance for keeping dishes, countertops clean and hygienic. In the construction industry, 2B stainless steel sheets can be used to manufacture hanging parts, roofs, walls, decorations, elevators, handrails, stairs and brackets, etc. Stainless steel sheets are cold-rolled and have high strength and excellent weather resistance. In fact, the strength of 2B stainless steel plate is higher than that of ordinary steel plate, and the service life is longer.

 

The chemical industry also uses 2B stainless steel plates to manufacture emulsion tanks, reaction tanks, storage tanks, sand mats and heat exchangers. Stainless steel plates are highly resistant to acids, alkalis, and corrosion, and can be used in extremely harsh chemical environments, which can greatly reduce the maintenance and replacement costs for process equipment and storage tanks. At the same time, 2B stainless steel plate is also widely used in marine engineering. It is often used to make ship hulls, ship plates, storage tanks, docks, breakwaters, etc. 2B stainless steel plate can stably withstand seawater and wind and waves in the marine environment, resist the erosion of pollutants and sea salt, and has very excellent corrosion resistance.

SKU	SS_SH_316_2B_430 /O-0.05
Grade	316 / 1.4401
Length	2500 mm
Width	1250 mm
Thickness	3 mm
Finish	2B
Proof Stress	200 Min MPa
Tensile Strength	500 to 700 MPa
Elongation	40 Min %
Density	8.00 g/cm³
Melting Point	1400 °C
Thermal Expansion	15.9 x10^-6 /K
Modulus of Elasticity	193 GPa
Thermal Conductivity	16.3 W/m.K
Electrical Resistivity	0.074 x10^-6 Ω .m
Machinability	Good
Workability - Cold	Average
Weldability - Gas	Average
Weldability - Arc	Excellent
Weldability - Resistance	Excellent
Brazeability	Good

 

 

 

 

 

Hot Tags: 2b stainless steel plate, China 2b stainless steel plate manufacturers, suppliers, factory, 201 Stainless Steel Sheet, 2B Finish Stainless Steel 304 Plate, 302 Stainless Steel Sheet, 309S Stainless Steel Sheet, Stainless Steel Sheet, 301 Stainless Steel Sheet