304 Stainless Steel Thickness
304 Stainless Steel Thickness
304 Stainless Steel Thickness
304 Stainless Steel Thickness
304 Stainless Steel Thickness

304 Stainless Steel Thickness

304 stainless steel sheet Chemical composition:
C ≤ 0.08,
Si ≤ 1.00,
Mn ≤ 2.00,
P ≤ 0.045,
S ≤ 0.030,
Cr 18.00~20.00,
Ni 8.00~10.50,
N ≤ 0.10.

Send Inquiry

Product Introduction

304 stainless steel thickness

Types austenitic stainless steels provide useful resistance to corrosion on a wide range of moderately oxidizing to moderately reducing environments. The alloys are used widely in equipment and utensils for processing and handling of food, beverages and dairy products. Heat exchangers, piping, tanks and other process equipment in contact with fresh water also utilize these alloys. Building facades and other architectural and structural applications exposed to non marine atmospheres also heavily utilize the 18-8 alloys. In addition, a large variety of applications involve household and industrial chemicals.
our products such as stainless steel 201, 202 , 301 , 303 , 304 , 304L , 304H , 309, 309S , 309Nb ,310 , 310S , 310L , 310H , Uranus 65 , 310H , 314 , 316, 316L , 316Ti, 317, 317L, 321, 347, 347H , 409L , 420 , 420J1 , 420J2 , 430 , 431,434 , 436L , 439 , 441, 443 , 444 , 904L , 2205 , 2304 , 2507 , 253MA , 254Mo , 631 , 654MO ,17-7pH ,N08367 (AL 6XN ) sheet plate are always available on stock. For cold rolled stainless steel sheet, thickness range from 0.3mm - 8.0mm, for hot rolled stainless steel plates, thickness range from 3.0-100mm.

GRADE	DESIGNATION		Chemical composition
GRADE	EN	AISI/ ASTM	C	Cr	Ni	Mo	Mn	N	Others
AUSTENITIC	1.4372	201	<=0.15	16,00 to18,00	Max 1.00		5,50 to 7,50	0.05 to 0.25
	1.4373	202	<=0.15	17,00 to19,00	4.00 to 6.00		7,50 to 10,50	0.05 to 0.25
	1.4310	301	0.05 to 0.15	16,00 to18,00	6.00 to 8.00		<=2.00	<=0.11
	1.4305	303	≤0.10	17,00 to19,00	8.00 to10.00		≤2.00	≤0.11
	1.4301	304	≤0.07	17.50 to19.50	8.00 to10.50		<=2.00	≤0.11
	1.4306	304L	≤0.030	18.00 to 20.00	10.00 to12.00		≤2.00	≤0.11
	1.4303	305	≤0.06	17.00 to19.00	11.00 to13.00		<=2.00	≤0.11
	1.4833	309S	≤0.15	22.00 to 24.00	12.00 to 14.00		≤2.00	≤0.11
	1.4845	310S	≤0.10	24.00 to 26.00	19.00 to 22.00		<=2.00	≤0.11
	1.4841	314	≤0.20	24.00 to 26.00	19.00 to 22.00		≤2.00	≤0.11
	1.4401	316	≤0.07	16.50 to 18.50	10.00 to 13.00	2.00 to 2.50	<=2.00	≤0.11
	1.4406	316L	≤0.030	16.50 to 18.50	10.00 to 13.00	2.00 to 2.50	≤2.00	≤0.11
	1.4571	316TI	≤0.08	16.50 to 18.50	10.50 to 13.50	2.00 to 2.50	<=2.00	≤0.11	Ti:5×c-0.70
	1.4438	317L	≤0.030	17.50 to 19.50	13.00 to 16.00	3.00 to 4.00	≤2.00	≤0.11
	1.4541	321	≤0.080	17.00 to19.00	9.00 to 12.00		<=2.00		Ti:5×c-0.70
	1.4550	347	≤0.080	17.00 to19.00	9.00 to 12.00		≤2.00		Nb:10×c-1.0
	1.4539	904L	≤0.020	19.00 to21.00	24.00 to 26.00	4.00 to 5.00	≤2.00	≤0.11	Cu:1.20 to 2.00
DUPLEX	1.4462	2205	≤0.030	21.00 to23.00	4.50 to 6.50	2.50 to 3.50	≤2.00	0.10 to 0.22
	1.4362	2304	≤0.030	22.00 to24.00	3.50 to 5.50	0.10 to 0.60	≤2.00	0.05 to 0.20	Cu:0.10 to 0.60
	1.4410	2507	≤0.030	24.00 to26.00	6.00 to 8.00	3.00 to 4.50	≤2.00	0.24 to 0.35
	1.4507	255	≤0.030	24.00 to 26.00	6.00 to 8.00	3.00 to 4.00	≤2.00	0.20 to 0.30	Cu:1.00 to 2.50
FERRITIC	1.4512	409	≤0.030	10.50 to12.50			≤1.00		Ti:6×(c+N) to 0.65
	1.4016	430	≤0.080	16.00 to 18.00			≤1.00
	1.4113	434	≤0.080	16.00 to 18.00			≤1.00	0.90 to 1.40
	1.4521	444	≤0.025	17,00 to22,00		1.80 to 2.50	≤1.00	≤0.030	Ti:4×(c+N)+0.15 to 0.80
	1.4749	446	0.15 to 0.20	26.00 to 29.00			≤1.00	0.15 to 0.25
MATENSITIC	1.4006	410	0.08 to 0.15	11.50 to 13.50	≤0.75	≤1.50
MATENSITIC	1.4021	420	0.16 to 0.25	12.00 to 14.00		≤1.50