Hot Rolled Cold Rolled Carbon Steel Ss304

Hot Rolled Cold Rolled Carbon Steel Ss304
Hot Rolled Cold Rolled Carbon Steel Ss304
Hot Rolled Cold Rolled Carbon Steel Ss304
Hot Rolled Cold Rolled Carbon Steel Ss304

Hot Rolled Cold Rolled Carbon Steel Ss304

304 stainless steel plate Features:
corrosion resistance
high temperature resistance
high strength
beautiful and other advantages

Send Inquiry

Product Introduction

Hot Rolled Carbon Steel and Cold Rolled Carbon Steel are two different manufacturing processes used to produce steel. The key difference between these processes is the temperature at which they are performed.

Hot Rolled Carbon Steel is made at temperatures above 1700°F, while Cold Rolled Carbon Steel is made at temperatures below 1700°F. This difference in temperature leads to different properties in the final product.

SS304 is a grade of stainless steel that is commonly used in the food processing industry. It has excellent corrosion resistance and is easy to clean, making it ideal for use in environments where hygiene is critical.

When it comes to choosing between Hot Rolled and Cold Rolled Carbon Steel for SS304, it really depends on the specific application. Hot Rolled Carbon Steel has a rougher surface finish and is less precise in its dimensions. Cold Rolled Carbon Steel, on the other hand, has a smoother surface finish and is more precise in its dimensions.

In general, if the application requires precise dimensional tolerances and a smoother surface finish, Cold Rolled Carbon Steel is the better option. However, if the application doesn't require these features and cost is a factor, Hot Rolled Carbon Steel can be a more economical choice.

Chemical Composition
The typical chemical composition is shown in the table below.
Grade	Standard	304 Chemical Composition
		C	Si	Mn	Cr	Ni	P	S	Mo	Others
		≤ %	≤ %	%	%	%	≤ %	≤ %	≤ %	%
304	ASTM A240	0.08	0.75	2	18.0 - 20.0	8.0 - 10.5	0.045	0.03	-	N≤ 0.10
1.4301	EN 10088-2	0.07	1	2	17.0 - 19.5	8.0 - 10.5	0.045	0.015	-	N≤ 0.11
SUS304	JIS G 4304 \| JIS G 4305	0.08	1	2	18.0 - 20.0	8.0 - 10.5	0.045	0.03	-	-

Mechanical Properties
The mechanical properties are given in the table below.
Grade	Standard	304 Mechanical Properties
		Tensile Strength	Yield Strength 0.2%	Elongation >%	Hardness
		(MPa) ≥	(MPa) ≥	Elongation >%	HRB ≤	HB ≤
304	ASTM A240	515	205	40	92	201
1.4301	EN 10088-2	520	210	45	90	215
SUS304	JIS G 4304 JIS G 4305	520	205	40	90	187

304 stainless steel is a common material in stainless steel, with a density of 7.93 g/cm3, which is also called 18/8 stainless steel in the industry.

High temperature resistant to 800°C and processability. Common labeling methods on the market include 0Cr18Ni9 and SUS304. Among them, 0Cr18Ni9 generally means national standard production, and 304 generally means ASTM standard production.

Surface

Steel Plate Ss 304