Coating Film NM360 Steel Plate
Coating Film NM360 Steel Plate
Coating Film NM360 Steel Plate
Coating Film NM360 Steel Plate
Coating Film NM360 Steel Plate

Coating Film NM360 Steel Plate

Chemical composition of NM360 wear-resistant steel plate:
Carbon C content: 0.25;
Si content: 0.70;
Mn content: 1.60;
P content: 0.025;
Sulfur S content: 0.015;
Chromium Cr content: 0.80;
Nickel Ni content: 0.50;
Molybdenum Mo content: 0.50;
Ti content: 0.050;
Aluminum Als content: ≥0.010;

Send Inquiry

Product Introduction

Coating Film NM360 Steel Plate

With the rapid development of the industrial field, the demand for wear-resistant materials is growing day by day. In this context, NM360 high manganese steel has been widely concerned for its excellent wear resistance. In this paper, the chemical composition, mechanical properties and wear resistance of NM360 will be introduced in detail, and the scope of its application will be discussed.

一, chemical composition: carefully deployed, give the steel excellent performance

NM360 is a high manganese steel, its chemical composition mainly includes carbon, silicon, manganese, phosphorus and sulfur and other elements. Carefully formulated, the content and proportion of these elements give NM360 excellent wear resistance. Among them, carbon can improve the hardness and strength of steel, silicon helps to improve toughness and corrosion resistance, and manganese can enhance the wear resistance and toughness of steel. The low content of phosphorus and sulfur helps to reduce impurities in the steel and improve its purity.

二, mechanical properties: high strength and toughness, to meet the needs of complex engineering

The mechanical properties of NM360 are excellent and can meet the needs of various complex engineering structures. Its hardness is usually between 350-400HBW, tensile strength and yield strength is very high, can reach more than 1200MPa. In addition, the mechanical properties such as elongation, impact toughness, section shrinkage and bending limit are excellent. These excellent mechanical properties make the NM360 widely used in wear-resistant parts that work under large loads and moderate speeds, such as gears, bushings, piston pins, etc.

三, wear resistance: the effect of alloying elements and heat treatment process to improve wear resistance

The wear resistance of NM360 is mainly due to the role of its alloying elements and the application of heat treatment process. Chromium, nickel, molybdenum and other alloying elements are added to NM360, which can significantly improve the wear resistance of steel. In addition, heat treatment of NM360 can change its microstructure and further improve its wear resistance. Through the steps of heating, insulation and cooling, the wear-resistant plate can obtain the required metallographic microstructure, give full play to the potential of steel, improve the performance of the workpiece, reduce the weight of the workpiece, save materials, reduce costs, and extend the service life of the workpiece.

四， Application fields: Wide coverage to meet the needs of industrial diversification

The NM360 has a wide range of applications. In addition to being used as a wear-resistant component, it can also be used to manufacture a variety of mechanical parts and structural parts that require anti-wear properties. For example, in the petroleum and petrochemical industry, chemical equipment manufacturing enterprises, power station construction and other fields, NM360 is widely used in the production of reactors, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear reactor pressure shells, liquefied petroleum gas cylinders, separators and other equipment. In addition, because the NM360 also has a good work hardening capability, its hardness and wear resistance can be improved through deformation during the manufacturing process.