NM360 Abrasion Resistant Steel Plate
NM360 Abrasion Resistant Steel Plate
NM360 Abrasion Resistant Steel Plate
NM360 Abrasion Resistant Steel Plate
NM360 Abrasion Resistant Steel Plate

NM360 Abrasion Resistant Steel Plate

Chemical composition of NM360 wear-resistant steel plate:
Carbon C content: 0.25;
Si content: 0.70;
Mn content: 1.60;
P content: 0.025;
Sulfur S content: 0.015;
Chromium Cr content: 0.80;
Nickel Ni content: 0.50;
Molybdenum Mo content: 0.50;
Ti content: 0.050;
Aluminum Als content: ≥0.010;

Send Inquiry

Product Introduction

NM360 Abrasion Resistant Steel Plate:

NM360 brand introduction:

N is nai (nai)M is the first pinyin letter of the two Chinese characters, and 360 represents the average Brinell hardness of this steel plate.

2, NM360 common delivery status:

NM360 steel plate to quench, quench + temper. TMCP+ tempered, tempered or hot-rolled delivery.

3, NM360 steel plate advantages and applications:

(1) The advantages of NM360 are:

1. NM360 high wear resistance: wear test shows that the wear resistance of the wear-resistant composite plate is 12-18 times higher than that of low carbon steel, 5 times higher than that of stainless steel and high manganese steel, and 1 times higher than that of cast high chromium iron.

2. NM360 high impact resistance: Due to the use of mild steel substrate, wear-resistant composite board has high impact resistance, fully reflecting the advantages of composite material both wear and impact resistance. This is the as-cast wear-resistant material can not.

3. NM360 convenient processing performance: wear-resistant surfacing composite plate can be cold-formed, round, can be cut by plasma cutting method, can be easily welded wear-resistant composite plate on the surface of the worn parts.

4. NM360 high performance price: Although the cost of using wear-resistant surfacing composite board is increased, the performance price ratio is about 2-4 times higher than that of ordinary materials considering the service life, maintenance costs, downtime losses, etc. Due to the reasonable use of materials, the price of wear-resistant surfacing composite plate is 50% lower than that of manual surfacing of the same material. Other specifications are customized according to customer requirements.