High Carbon Steel 1.0601 C60

High Carbon Steel 1.0601 C60

Chemical composition:

Carbon C: 0.57 ~ 0.65

Silicon Si: 0.17 ~ 0.37

Manganese Mn: 0.50 ~ 0.80

Sulfur S: ≤0.035

Phosphorus P: ≤0.035

Chromium Cr: ≤0.25

Nickel Ni: ≤0.25

Copper Cu: ≤0.25

Mechanical properties:

Tensile strength σb (MPa) : ≥675(69)

Yield strength σs (MPa) : ≥400(41)

elongation δ5 (%) : ≥12

section shrinkage ψ (%) : ≥35

Hardness: not heat treated ≤255HB annealed steel ≤229HB

Sample size: Sample size: 25mm

● Heat treatment specification and metallographic structure: Heat treatment specification: normalizing, 810℃.

What kind of steel is Grade 60 steel

c60 is a high-quality carbon steel, that is, 60# steel

Material name: High quality carbon structural steel

No. 60 steel is hypoeutectoid steel, with high strength, hardness and elasticity, low plasticity when cold deformation, poor machinability, poor welding and hardenability, water quenching has a tendency to crack, and large parts are mostly normalized. No. 60 steel is used to manufacture shafts, spring rings, wheel shafts, various gaskets, cams, steel ropes and other parts with large forces and working under friction conditions, requiring high strength, wear resistance and certain elasticity.

Hot Tags: high carbon steel 1.0601 c60, China high carbon steel 1.0601 c60 manufacturers, suppliers, factory, Calibrate Steel Rod, 65Mn High Carbon Steel Sheet, Carbon Steel Round Bar C60, Cold Rolled High Carbon Steel Coil, S20C Carbon Steel, Cold Drawn Steel Round Bar