1000mm Width 316 Stainless Steel Sheet
1000mm Width 316 Stainless Steel Sheet
1000mm Width 316 Stainless Steel Sheet
1000mm Width 316 Stainless Steel Sheet

1000mm Width 316 Stainless Steel Sheet

Material: 316 Stainless Steel Standard:
ASTM
AISI
SUS
JIS
EN

Send Inquiry

Product Introduction

316 stainless steel applications: mainly used for pitting resistance materials. Such as heat exchange parts and high temperature corrosion resistant bolts.

316 stainless steel

Product performance
Tensile strength bridge (Mpa) 620 MIN
Yield strength (Mpa) 310 MIN
Elongation (%) 30 MIN
The area was reduced by (%) 40 MIN
316 stainless steel density
8.03g /cm3, austenitic stainless steel is generally used this value
316 Chromium content (%) 16--18.

Physical Properties	Metric	English	Comments
Density	8.00 g/cc	0.289 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell B	79	79
Tensile Strength, Ultimate	580 MPa	84100 psi
Tensile Strength, Yield	290 MPa	42100 psi
Elongation at Break	50 %	50 %	in 50 mm
Tensile Modulus	193 GPa	28000 ksi
Izod Impact	129 J	95.1 ft-lb
Charpy Impact	105 J	77.4 ft-lb	V-notch

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000740 ohm-cm	0.0000740 ohm-cm	at 20ºC
Magnetic Permeability	1.008	1.008	at RT

Thermal Properties	Metric	English	Comments
CTE, linear	16.0 µm/m-°C @Temperature 0.000 - 100 °C	8.89 µin/in-°F @Temperature 32.0 - 212 °F
	16.2 µm/m-°C @Temperature 0.000 - 315 °C	9.00 µin/in-°F @Temperature 32.0 - 599 °F
	17.5 µm/m-°C @Temperature 0.000 - 540 °C	9.72 µin/in-°F @Temperature 32.0 - 1000 °F
Specific Heat Capacity	0.500 J/g-°C @Temperature 0.000 - 100 °C	0.120 BTU/lb-°F @Temperature 32.0 - 212 °F
Thermal Conductivity	16.3 W/m-K @Temperature 100 °C	113 BTU-in/hr-ft²-°F @Temperature 212 °F
Melting Point	1370 - 1400 °C	2500 - 2550 °F
Solidus	1370 °C	2500 °F
Liquidus	1400 °C	2550 °F
Maximum Service Temperature, Air	870 °C	1600 °F	Intermittent
	925 °C	1700 °F	Continuous Service